Thumlers Ultra Vibe Vibratory Tumblers
A Vibrating Tumbler for Deburring and Polishing Metal parts
How to Debur with the UV10 Industrial Tumbler
How to Polish Brass or Metal with the UV10 Industrial Tumbler
Available in 10, 18 lb and 45 lb Capacities
Ultra Vibe 10
10 lb Capacity
Not For Rock Use
|
Ultra Vibe 10 |
|
Extra Bowl with Lid |
- Removable Heavy Polyethylene Bowl with Lid
- 3 qt. capacity 125-400 cartridge cases wt. capacity 10 lb.
- Mass creates a cyclonic effect, moves around the bowl and down into the center.
- Cap is easily removed so that you can see it work
- Ball Bearing motor operates on 115 volts and is overload protected
- Vibrates at 3000 VPM
- Dimensions are 10" diameter x 11" high
- Shipping wt. with media. - 11 lbs.
NOTE: This tumbler is designed to work with several types
of
media such as walnut shell and ground corn cob.
The UV-10 requires at least
3 lbs of media for the
initial load. The media is reusable until it becomes too dirty or
broken down from use.
We recommend purchasing a little more so
that you don't have to immediately reorder if you need to add a little more at
start-up or a later date.
We also offer 10% discount on any media ordered at
the time of purchase of this Tumbler.
This discount will
be calculated at the time of shipment
Click here to go to our Tumbling Media page.
Ultra Vibe 18
18 lb Capacity
Not For Rock Use
|
Ultra Vibe 18 |
|
Extra Bowl with Lid |
UV18 - A Vibrating Tumbler for Cartridge Cases
- Removable Heavy Polyethylene Bowl with Lid
- 1 1/2 Gallon Capacity - Weight Capacity 18 lbs
- Mass creates a cyclonic effect, Material moves around the bowl and down the center
- These vibrating tumblers work great for pre-shaped and water worn pebbles
- Cap is easily removed so that you can see it work
- 1/20 hp 115 Volt Ball Bearing Motor, 1.6 Amps, Thermally protected
- Vibrates at 3000 VPM
- Dimensions are 11 1/2" diameter x 12 1/2" high
- Shipping wt. - 18 lbs.
NOTE: This tumbler is designed to work with several types
of
media such as walnut shell and ground corn cob.
The UV-18 requires at least
6 lbs of media for the
initial load. The media is reusable until it becomes too dirty or
broken down from use.
We recommend purchasing a little more so
that you don't have to immediately reorder if you need to add a little more at
start-up or a later date.
We also offer 10% discount on any media ordered at
the time of purchase of this Tumbler.
This discount will
be calculated at the time of shipment
Click here to go to our
Tumbling Media page.
A Rotary Tumbler for Deburring and Polishing Metal parts
Model B HI Speed
Rotary Tumbler
$182.00
This Hi Speed Model B Tumbler is the same as the rock tumbling model except it has a hi speed motor and is used primarily for finishing brass cartridges. It has 1/30 HP 3000 rpm - 115 volt motor. The barrel rotation is 30 rpm and it has room for 200 to 500 brass cartridges.
NOTE: This tumbler is designed to work with several types
of
media such as walnut shell and ground corn cob.
The Model B requires at least
6 lbs of media for the
initial load. The media is reusable until it becomes too dirty or
broken down from use.
We recommend purchasing a little more so
that you don't have to immediately reorder if you need to add a little more at
start-up or a later date.
We also offer 10% discount on any media ordered at
the time of purchase of this Tumbler.
This discount will
be calculated at the time of shipment
Click here to go to our Tumbling Media page.
